Foam Gun Prewash 1 liter car prewash. Powerful and safe foaming prewash with dry and compact foam.

Following the correct washing procedure, we start with the cleaning of rims and tires and their decontamination, and then move on to the prewash, which is carried out before proceeding with manual washing with shampoo.

Foam Gun Prewash from Maniac Line™ by Mafra is a powerful and safe foaming agent with dry and compact foam for foam guns to be used in the prewash phase. Respect the previously applied protectors, including nanotechnology-based protectors or

This product, if used in combination with a pressure washer, allows you to eliminate 90% of the dirt, allowing you to prevent swirls or microscratches in subsequent washing phases.

MODE OF USE

It is recommended for use through a foam gun (foam lance) but can be used as an excellent prewash with a low pressure manual pump:

With Foam Gun: - In winter, dilute 1:5 (1 part of product and 5 of water), to make a final dilution of 1:50 at the outlet; - In summer, dilute 1:10 (1 part of product and 10 of water), to make a final dilution of about 1:110 at the outlet; - Pour a thick layer of foam on the vehicle; - Let the product act on the surface and wait for the foam to start to fall (it may take up to 5 minutes); - Rinse the vehicle starting from top to bottom

With low pressure manual pump: - In winter dilute 1:50 (1 part of product and 50 of water) 2 caps in 1 liter of water - In summer dilute 1:100 (1 part of product and 100 of water) 1 cap in a liter of water - Dispense the product on the vehicle - Let the product act on the surface for a minute without drying the product on the body; - Rinse the vehicle starting from top to bottom