Car limescale stain removal spray 500 ml - Maniac Line.

Water Spot Mineral Remover from the Maniac Line by Mafra is a specific decontaminant for removing limescale stains from car surfaces. Ideal as a window cleaner before applying an anti-rain or nano glass sealant treatment

The product is ready to use, easy to use and non-abrasive, and allows the effective removal of mineral contaminants (limestone, salt residues, cement saltpeter) and oxidations, strongly anchored on all surfaces of the car.

Water Spot Mineral Remover is a safe product that respects the surfaces on which it is applied, even those painted, allowing stains and halos to be dissolved without creating damage.

MODE OF USE

Before using the product, it is recommended to wash thoroughly.

- In the presence of localized stains: Dispense the product directly onto the surface; Let it act for 30 seconds; Clean with a clean microfiber cloth such as our “Polish Cloth”; Finish with a second dry and clean microfiber cloth.

- For the decontamination of the windshield and rear window: Proceed half the glass at a time; In case of limescale stains distributed over the entire body, spray the product directly and evenly on one panel at a time; Massage with “Microfiber Pad” Rinse with clean water before proceeding to the next panel.

- In the presence of persistent stains: Repeat the operation; Let the product act longer, for a maximum time of 60 seconds; Do not let the product dry on the bodywork;

- For less accessible places: Emblems, locks, wheel nuts, moldings: Distribute and work the product with a soft bristle brush.

Step 1 Deliver the product on our “Microfiber Pad”;

Step 2 Spread the product on the surface with our 'Microfiber Pad'.

Step 3 Spread the product evenly over the surface with our clean and dry “Polishing Cloth” and proceed to finish with a dry and clean microfiber cloth.