How many times has this happened to you? You walk into a room and smell that characteristic musty smell. Then, looking closer, you notice those unsightly dark spots that creep into the corners, behind the cabinets or along the baseboard. It is mold, a silent and obstinate enemy that not only spoils the appearance of your home, but can also pose a serious threat to your family's health. Allergies, respiratory problems, irritations: the dangers are real, especially for children and the elderly. Many try to combat it with improvised remedies, such as bleach, getting only temporary relief. The stain disappears on the surface, but the roots of the fungus remain alive and ready to re-emerge stronger than before.

The truth is that a superficial approach is not enough to permanently defeat mold. We need a strategy, a professional method that acts in depth, eliminating the root problem and creating a protective barrier for the future. Today we will introduce you to exactly that: a complete, tested and reliable system based on the 1MM product line, designed to face every phase of the battle against mold. From safe initial cleaning, to the radical elimination of spores, to the long-term protection of your walls. It's time to stop fighting a losing battle and claim the well-being of your home environment.

Understanding the Enemy: Why Mold Is More Than Just a Stain

Before fighting an enemy, it's crucial to know them. Mold isn't just dirt; it's a living organism, a type of fungus that thrives in humid, poorly ventilated, and low-light environments. Its spores are everywhere in the air, invisible to the naked eye, waiting for ideal conditions to take root and proliferate. When they find a suitable surface, such as a damp wall due to condensation, infiltration or thermal bridges, they begin to grow, forming visible colonies and releasing new spores into the environment. This continuous cycle is the reason why the mold always seems to come back.

The False Myths: Why Bleach Is NOT the Solution

One of the most common mistakes in the fight against mold is the use of bleach (sodium hypochlorite). Although it may whiten the surface stain, making it appear to have disappeared, its action is deceptive. Bleach, composed mainly of water, cannot penetrate deep into porous surfaces such as plaster. It kills only the mold on the surface, while the water contained in the product may even end up nourishing the deeper roots (mycelia), worsening the problem in the long term. In addition, the chemical reaction can release harmful volatile organic compounds (VOCs) into the air. It is a cosmetic remedy that masks the problem without solving it.

“A splash of bleach is enough and the mold is gone.” This is the most common and the most wrong advice. For a definitive result, a specific mold treatment is needed to annihilate the fungus at the root.

The Professional 1MM Method in 3 Steps: Clean, Delete, Protect

The ultimate solution against mold is not a single product, but a strategic process. The 1MM line has been developed precisely to guide you through three fundamental steps that guarantee a complete and lasting result. Let's look at them in detail.

Phase 1 Preliminary Cleaning

Prepare the Battlefield with 1MM Green

The first step is to remove the surface layer of mold and dirt without dispersing the spores in the environment. 1MM Green is a specific, non-aggressive sanitizing detergent that cleans the surface and prepares it for subsequent treatment.

Discover 1MM Green

Phase 2 Shock Action

Annihilate Root Mold with 1MM Super

This is the heart of the treatment. 1MM Super is a powerful mold that penetrates deep into the plaster, destroying the roots (mycelia) and spores of the fungus. Its quick and sanitizing action completely cleans the treated area.

Discover 1MM Super

Phase 3 Future Prevention

Create an Invisible Shield with 1MM Protector

Once the mold has been eliminated, you must make sure that it never returns. 1MM Protector is an innovative additive that, added to the paint, creates a long-lasting protective barrier, preventing condensation and humidity from creating the conditions for a new infestation.

Discover 1MM Protector

Practical User Guide: The Secrets to a Perfect Result

Following the correct method is just as important as using the right products. Here is a step-by-step guide to apply the 1MM treatment like a real professional and permanently solve the problem of mold on the walls.

Step 1: Cleaning with 1MM Green

How and why to use it

The objective of this phase is to mechanically remove the most superficial part of the mold and the accumulated dirt, without however “disturbing” the spores and making them fly around the room. 1MM Green is formulated for this reason: its cleansing and sanitizing action softens the infestation and prepares it for the next phase.

1. Protect yourself: Always wear gloves and a mask (FFP2 or higher) to avoid contact and the inhalation of spores.
2. Spray generously: Apply 1MM Green directly to the moldy surface, covering the entire area and also a margin of about 20 cm around.
3. Let it act: Wait a few minutes to allow the product to act and soften the mold.
4. Gently remove: Use a damp microfiber cloth to dab and gently remove the mold. Avoid rubbing hard. The goal is not to make the wall white again, but to remove the 'big'.
5. Dries: Allow the wall to dry completely before moving on to the next step.

Phase 2: Radical Elimination with 1MM Super

The decisive attack

Now that the surface is ready, it's time to launch the final attack. 1MM Super is a biocide, a specific product for killing living organisms such as fungi. Its formula penetrates the porosity of the wall and destroys the hyphae, or the roots that anchor the mold to the wall and allow it to grow back.

• Ventilate the room: Open windows to ensure good air circulation during application and drying.
• Apply the product: Spray 1MM Super in abundance on the previously cleaned area, making sure to thoroughly wet the entire surface.
• DON'T TOUCH: This is the most important step. Once applied, 1MM Super must be left to act until completely dry. YOU DON'T HAVE TO RINSE OR SCRUB. Its action continues as it dries, sterilizing the wall in depth. You will see the stain gradually fade away.
• Second application (if necessary): In the case of very stubborn infestations, a second application may be necessary after 24 hours.

Step 3: Long-Term Protection with 1MM Protector

The barrier to the future

You won the battle, now you must win the war. To prevent mold from recurring, you must change the condition of the wall surface. 1MM Protector is a protective additive that, mixed with paint, creates a heat and water repellent shield. It makes the wall “unsightly” for mold, preventing condensation from forming and settling.

• Prepare the painting: Choose a good breathable or anti-condensation paint.
• Add the Protector: Pour the recommended dose of 1MM Protector (usually a 250 ml bottle for 4-5 liters of paint) directly into the paint can.
• Mix thoroughly: Mix the product well with the paint until a homogeneous mixture is obtained.
• Paint: Proceed with painting the wall as you normally would, applying one or two coats. The protection will be active as soon as the paint is completely dry.

Comparison Chart: Choose the Right 1MM Product for You

The 1MM line offers specific solutions for every need. To help you choose, we have created a clear and simple comparison table. In particular, notice the difference between the two formats of 1MM Super: the practical 750 ml spray for targeted interventions and the convenient 5-liter tank for large areas or to have a stock always ready.

Beyond Products: Additional Tips for a Mold-Free Home

The 1MM treatment is incredibly effective, but to maintain results over time, it is important to also act on the causes that generated the mold. Here are some practical tips to integrate into your daily routine.

Your Home Deserves to Be a Healthy and Safe Haven

Tackling mold may seem like a daunting task, but with the right tools and knowledge, it's a battle you can win. Stop wasting time and money on temporary solutions that only mask the problem. The 3-phase method of the 1MM line — Clean with Green, Delete with Super, Protect with Protector — is not just a series of products, but a complete system that guarantees you a professional and lasting result. It is an investment in the quality of your home and, above all, in the health of those you love.

Imagine being able to breathe deeply in every room, without the smell of damp and without the worry of stains hidden behind the furniture. Imagine clean, healthy, and protected walls for years to come. This result is at your fingertips. Don't wait for the problem to get worse. Take matters into your own hands today and transform your home into the safe and welcoming haven you always wanted.